Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Lighting (ext)
Model Year: 2008 Model: Sequoia Doc ID: RM000003GQA000X
Title: LIGHTING (EXT): LICENSE PLATE LIGHT ASSEMBLY: INSTALLATION (2008 Sequoia)

INSTALLATION

1. INSTALL LICENSE PLATE LIGHT BULB

(a) Install the license plate light bulb into the light socket.

2. INSTALL LICENSE PLATE LIGHT ASSEMBLY

(a) Tighten the 4 screws.

(b) Connect the 4 harness clamps and install the license plate light.

3. INSTALL REAR TELEVISION CAMERA ASSEMBLY PARK ASSIST / MONITORING: TELEVISION CAMERA: INSTALLATION (2008 Sequoia)+

4. INSTALL BACK DOOR OUTSIDE GARNISH SUB-ASSEMBLY EXTERIOR PANELS / TRIM: BACK DOOR OUTSIDE GARNISH: INSTALLATION (2008 Sequoia)+

5. INSTALL BACK DOOR SERVICE HOLE COVER DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

6. INSTALL BACK DOOR TRIM BOARD ASSEMBLY DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

7. INSTALL BACK DOOR PULL STRAP DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

8. INSTALL BACK DOOR STRAP COVER DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

9. INSTALL BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

10. INSTALL BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+

11. INSTALL BACK DOOR CENTER GARNISH DOOR / HATCH: BACK DOOR: REASSEMBLY (2008 Sequoia)+